Saddle Stich Booklets in Sacramento | RushMyPrints

Need to impress your target audience in the Sacramento Convention Center with Booklets in Sacramento? Give RushMyPrints a call for all of your Booklet Printing Services in Sacramento. This commercial printer in Palo Alto, San Francisco and Sacramento specializes in 100% offset, full color printing.

For the best quality quality and value on your booklets. RushMyPrints offers multiple printing sizes, paper stocks and finishing options.

Get instant quotes and proofs on your secure RushMyPrints account.

And you can use our mailing service for further cost and time-savings on your project. If you’re looking for premier printing services, give RMP a call in anticipation of placing bulk orders.

Save time and money by ordering online or giving us a call right now to skip the line and rush printing in Sacramento today.

As a Commercial Printer in Sacramento – What does RushMyPrints Offer?

You can easily print multi-page documents as a booklet by adjusting the print settings in Adobe Reader at RushMyPrints.

From Adobe Reader, click File, Print, or press Control and P on your keyboard to open print options.

In computing, a printer is a peripheral devicewhich makes a persistent human-readable representation of graphics or text on paper.

The first computer printer designed was amechanically driven apparatus by Charles Babbage for his difference engine in the 19th century;however, his mechanical printer design was not built until 2000.

The first electronic printer was the EP-101,invented by Japanese company Epson and released in 1968.

The first commercial printers generally usedmechanisms from electric typewriters and Teletype machines.

The demand for higher speed led to the developmentof new systems specifically for computer use.

In the 1980s were daisy wheel systems similarto typewriters, line printers that produced similar output but at much higher speed, anddot matrix systems that could mix text and graphics but produced relatively low-qualityoutput.

The plotter was used for those requiring highquality line art like blueprints.

The introduction of the low-cost laser printerin 1984 with the first HP LaserJet, and the addition of PostScript in next year's AppleLaserWriter, set off a revolution in printing known as desktop publishing.

Laser printers using PostScript mixed textand graphics, like dot-matrix printers, but at quality levels formerly available onlyfrom commercial typesetting systems.

By 1990, most simple printing tasks like fliersand brochures were now created on personal computers and then laser printed; expensiveoffset printing systems were being dumped as scrap.

The HP Deskjet of 1988 offered the same advantagesas laser printer in terms of flexibility, but produced somewhat lower quality output(depending on the paper) from much less expensive mechanisms.

Inkjet systems rapidly displaced dot matrixand daisy wheel printers from the market.

By the 2000s high-quality printers of thissort had fallen under the $100 price point and became commonplace.

The rapid update of internet email throughthe 1990s and into the 2000s has largely displaced the need for printing as a means of movingdocuments, and a wide variety of reliable storage systems means that a "physical backup"is of little benefit today.

Even the desire for printed output for "offlinereading" while on mass transit or aircraft has been displaced by e-book readers and tabletcomputers.

Today, traditional printers are being usedmore for special purposes, like printing photographs or artwork, and are no longer a must-haveperipheral.

Starting around 2010, 3D printing became anarea of intense interest, allowing the creation of physical objects with the same sort ofeffort as an early laser printer required to produce a brochure.

These devices are in their earliest stagesof development and have not yet become commonplace.

== Types of printers ==Personal printers are primarily designed to support individual users, and may be connectedto only a single computer.

These printers are designed for low-volume,short-turnaround print jobs, requiring minimal setup time to produce a hard copy of a givendocument.

However, they are generally slow devices rangingfrom 6 to around 25 pages per minute (ppm), and the cost per page is relatively high.

However, this is offset by the on-demand convenience.

Some printers can print documents stored onmemory cards or from digital cameras and scanners.

Networked or shared printers are "designedfor high-volume, high-speed printing".

They are usually shared by many users on anetwork and can print at speeds of 45 to around 100 ppm.

The Xerox 9700 could achieve 120 ppm.

A virtual printer is a piece of computer softwarewhose user interface and API resembles that of a printer driver, but which is not connectedwith a physical computer printer.

A virtual printer can be used to create afile which is an image of the data which would be printed, for archival purposes or as inputto another program, for example to create a PDF or to transmit to another system oruser.

A 3D printer is a device for making a three-dimensionalobject from a 3D model or other electronic data source through additive processes inwhich successive layers of material (including plastics, metals, food, cement, wood, andother materials) are laid down under computer control.

It is called a printer by analogy with aninkjet printer which produces a two-dimensional document by a similar process of depositinga layer of ink on paper.

== Technology ==The choice of print technology has a great effect on the cost of the printer and costof operation, speed, quality and permanence of documents, and noise.

Some printer technologies do not work withcertain types of physical media, such as carbon paper or transparencies.

A second aspect of printer technology thatis often forgotten is resistance to alteration: liquid ink, such as from an inkjet head orfabric ribbon, becomes absorbed by the paper fibers, so documents printed with liquid inkare more difficult to alter than documents printed with toner or solid inks, which donot penetrate below the paper surface.

Cheques can be printed with liquid ink oron special cheque paper with toner anchorage so that alterations may be detected.

The machine-readable lower portion of a chequemust be printed using MICR toner or ink.

Banks and other clearing houses employ automationequipment that relies on the magnetic flux from these specially printed characters tofunction properly.

=== Modern print technology ===The following printing technologies are routinely found in modern printers: ==== Toner-based printers ==== A laser printer rapidly produces high qualitytext and graphics.

As with digital photocopiers and multifunctionprinters (MFPs), laser printers employ a xerographic printing process but differ from analog photocopiersin that the image is produced by the direct scanning of a laser beam across the printer'sphotoreceptor.

Another toner-based printer is the LED printerwhich uses an array of LEDs instead of a laser to cause toner adhesion to the print drum.

==== Liquid inkjet printers ==== Inkjet printers operate by propelling variablysized droplets of liquid ink onto almost any sized page.

They are the most common type of computerprinter used by consumers.

==== Solid ink printers ==== Solid ink printers, also known as phase-changeprinters, are a type of thermal transfer printer.

They use solid sticks of CMYK-coloured ink,similar in consistency to candle wax, which are melted and fed into a piezo crystal operatedprint-head.

The printhead sprays the ink on a rotating,oil coated drum.

The paper then passes over the print drum,at which time the image is immediately transferred, or transfixed, to the page.

Solid ink printers are most commonly usedas colour office printers, and are excellent at printing on transparencies and other non-porousmedia.

Solid ink printers can produce excellent results.

Acquisition and operating costs are similarto laser printers.

Drawbacks of the technology include high energyconsumption and long warm-up times from a cold state.

Also, some users complain that the resultingprints are difficult to write on, as the wax tends to repel inks from pens, and are difficultto feed through automatic document feeders, but these traits have been significantly reducedin later models.

In addition, this type of printer is onlyavailable from one manufacturer, Xerox, manufactured as part of their Xerox Phaser office printerline.

Previously, solid ink printers were manufacturedby Tektronix, but Tek sold the printing business to Xerox in 2001.

==== Dye-sublimation printers ==== A dye-sublimation printer (or dye-sub printer)is a printer which employs a printing process that uses heat to transfer dye to a mediumsuch as a plastic card, paper or canvas.

The process is usually to lay one colour ata time using a ribbon that has colour panels.

Dye-sub printers are intended primarily forhigh-quality colour applications, including colour photography; and are less well-suitedfor text.

While once the province of high-end printshops, dye-sublimation printers are now increasingly used as dedicated consumer photo printers.

==== Thermal printers ==== Thermal printers work by selectively heatingregions of special heat-sensitive paper.

Monochrome thermal printers are used in cashregisters, ATMs, gasoline dispensers and some older inexpensive fax machines.

Colours can be achieved with special papersand different temperatures and heating rates for different colours; these coloured sheetsare not required in black-and-white output.

One example is Zink (a portmanteau of "zeroink").

=== Obsolete and special-purpose printingtechnologies === The following technologies are either obsolete,or limited to special applications though most were, at one time, in widespread use.

==== Impact printers ====Impact printers rely on a forcible impact to transfer ink to the media.

The impact printer uses a print head thateither hits the surface of the ink ribbon, pressing the ink ribbon against the paper(similar to the action of a typewriter), or, less commonly, hits the back of the paper,pressing the paper against the ink ribbon (the IBM 1403 for example).

All but the dot matrix printer rely on theuse of fully formed characters, letterforms that represent each of the characters thatthe printer was capable of printing.

In addition, most of these printers were limitedto monochrome, or sometimes two-color, printing in a single typeface at one time, althoughbolding and underlining of text could be done by "overstriking", that is, printing two ormore impressions either in the same character position or slightly offset.

Impact printers varieties include typewriter-derivedprinters, teletypewriter-derived printers, daisywheel printers, dot matrix printers andline printers.

Dot matrix printers remain in common use inbusinesses where multi-part forms are printed.

An overview of impact printing contains adetailed description of many of the technologies used.

===== Typewriter-derived printers ===== Several different computer printers were simplycomputer-controllable versions of existing electric typewriters.

The Friden Flexowriter and IBM Selectric-basedprinters were the most-common examples.

The Flexowriter printed with a conventionaltypebar mechanism while the Selectric used IBM's well-known "golf ball" printing mechanism.

In either case, the letter form then strucka ribbon which was pressed against the paper, printing one character at a time.

The maximum speed of the Selectric printer(the faster of the two) was 15.

5 characters per second.

===== Teletypewriter-derived printers ===== The common teleprinter could easily be interfacedto the computer and became very popular except for those computers manufactured by IBM.

Some models used a "typebox" that was positioned,in the X- and Y-axes, by a mechanism and the selected letter form was struck by a hammer.

Others used a type cylinder in a similar wayas the Selectric typewriters used their type ball.

In either case, the letter form then strucka ribbon to print the letterform.

Most teleprinters operated at ten charactersper second although a few achieved 15 CPS.

===== Daisy wheel printers ===== Daisy wheel printers operate in much the samefashion as a typewriter.

A hammer strikes a wheel with petals, the"daisy wheel", each petal containing a letter form at its tip.

The letter form strikes a ribbon of ink, depositingthe ink on the page and thus printing a character.

By rotating the daisy wheel, different charactersare selected for printing.

These printers were also referred to as letter-qualityprinters because they could produce text which was as clear and crisp as a typewriter.

The fastest letter-quality printers printedat 30 characters per second.

===== Dot-matrix printers ===== The term dot matrix printer is used for impactprinters that use a matrix of small pins to transfer ink to the page.

The advantage of dot matrix over other impactprinters is that they can produce graphical images in addition to text; however the textis generally of poorer quality than impact printers that use letterforms (type).

Dot-matrix printers can be broadly dividedinto two major classes: Ballistic wire printersStored energy printersDot matrix printers can either be character-based or line-based(that is, a single horizontal series of pixels across the page), referring to the configurationof the print head.

In the 1970s and '80s, dot matrix printerswere one of the more common types of printers used for general use, such as for home andsmall office use.

Such printers normally had either 9 or 24pins on the print head (early 7 pin printers also existed, which did not print descenders).

There was a period during the early home computerera when a range of printers were manufactured under many brands such as the Commodore VIC-1525using the Seikosha Uni-Hammer system.

This used a single solenoid with an obliquestriker that would be actuated 7 times for each column of 7 vertical pixels while thehead was moving at a constant speed.

The angle of the striker would align the dotsvertically even though the head had moved one dot spacing in the time.

The vertical dot position was controlled bya synchronised longitudinally ribbed platen behind the paper that rotated rapidly witha rib moving vertically seven dot spacings in the time it took to print one pixel column.

24-pin print heads were able to print at ahigher quality and started to offer additional type styles and were marketed as Near LetterQuality by some vendors.

Once the price of inkjet printers droppedto the point where they were competitive with dot matrix printers, dot matrix printers beganto fall out of favour for general use.

Some dot matrix printers, such as the NECP6300, can be upgraded to print in colour.

This is achieved through the use of a four-colourribbon mounted on a mechanism (provided in an upgrade kit that replaces the standardblack ribbon mechanism after installation) that raises and lowers the ribbons as needed.

Colour graphics are generally printed in fourpasses at standard resolution, thus slowing down printing considerably.

As a result, colour graphics can take up tofour times longer to print than standard monochrome graphics, or up to 8-16 times as long at highresolution mode.

Dot matrix printers are still commonly usedin low-cost, low-quality applications such as cash registers, or in demanding, very highvolume applications like invoice printing.

Impact printing, unlike laser printing, allowsthe pressure of the print head to be applied to a stack of two or more forms to print multi-partdocuments such as sales invoices and credit card receipts using continuous stationerywith carbonless copy paper.

Dot-matrix printers were being supersededeven as receipt printers after the end of the twentieth century.

===== Line printers ===== Line printers print an entire line of textat a time.

Four principal designs exist.

Drum printers, where a horizontally mountedrotating drum carries the entire character set of the printer repeated in each printablecharacter position.

The IBM 1132 printer is an example of a drumprinter.

Drum printers are also found in adding machinesand other numeric printers (POS), the dimensions are compact as only a dozen characters needto be supported.

Chain or train printers, where the characterset is arranged multiple times around a linked chain or a set of character slugs in a tracktraveling horizontally past the print line.

The IBM 1403 is perhaps the most popular,and comes in both chain and train varieties.

The band printer is a later variant wherethe characters are embossed on a flexible steel band.

The LP27 from Digital Equipment Corporationis a band printer.

Bar printers, where the character set is attachedto a solid bar that moves horizontally along the print line, such as the IBM 1443.

A fourth design, used mainly on very earlyprinters such as the IBM 402, features independent type bars, one for each printable position.

Each bar contains the character set to beprinted.

The bars moves vertically to position thecharacter to be printed in front of the print hammer.

In each case, to print a line, preciselytimed hammers strike against the back of the paper at the exact moment that the correctcharacter to be printed is passing in front of the paper.

The paper presses forward against a ribbonwhich then presses against the character form and the impression of the character form isprinted onto the paper.

Each system could have slight timing issues,which could cause minor misalignment of the resulting printed characters.

For drum or typebar printers, this appearedas vertical misalignment, with characters being printed slightly above or below therest of the line.

In chain or bar printers, the misalignmentwas horizontal, with printed characters being crowded closer together or farther apart.

This was much less noticeable to human visionthan vertical misalignment, where characters seemed to bounce up and down in the line,so they were considered as higher quality print.

Comb printers, also called line matrix printers,represent the fifth major design.

These printers are a hybrid of dot matrixprinting and line printing.

In these printers, a comb of hammers printsa portion of a row of pixels at one time, such as every eighth pixel.

By shifting the comb back and forth slightly,the entire pixel row can be printed, continuing the example, in just eight cycles.

The paper then advances and the next pixelrow is printed.

Because far less motion is involved than ina conventional dot matrix printer, these printers are very fast compared to dot matrix printersand are competitive in speed with formed-character line printers while also being able to printdot matrix graphics.

The Printronix P7000 series of line matrixprinters are still manufactured as of 2013.

Line printers are the fastest of all impact printersand are used for bulk printing in large computer centres.

A line printer can print at 1100 lines perminute or faster, frequently printing pages more rapidly than many current laser printers.

On the other hand, the mechanical componentsof line printers operate with tight tolerances and require regular preventive maintenance(PM) to produce top quality print.

They are virtually never used with personalcomputers and have now been replaced by high-speed laser printers.

The legacy of line printers lives on in manycomputer operating systems, which use the abbreviations "lp", "lpr", or "LPT" to referto printers.

==== Liquid ink electrostatic printers ====Liquid ink electrostatic printers use a chemical coated paper, which is charged by the printhead according to the image of the document.

The paper is passed near a pool of liquidink with the opposite charge.

The charged areas of the paper attract theink and thus form the image.

This process was developed from the processof electrostatic copying.

Color reproduction is very accurate, and becausethere is no heating the scale distortion is less than ±0.

1%.

(All laser printers have an accuracy of ±1%.

) Worldwide, most survey offices used this printerbefore color inkjet plotters become popular.

Liquid ink electrostatic printers were mostlyavailable in 36 to 54 inches (910 to 1,370 mm) width and also 6 color printing.

These were also used to print large billboards.

It was first introduced by Versatec, whichwas later bought by Xerox.

3M also used to make these printers.

==== Plotters ==== Pen-based plotters were an alternate printingtechnology once common in engineering and architectural firms.

Pen-based plotters rely on contact with thepaper (but not impact, per se) and special purpose pens that are mechanically run overthe paper to create text and images.

Since the pens output continuous lines, theywere able to produce technical drawings of higher resolution than was achievable withdot-matrix technology.

Some plotters used roll-fed paper, and thereforehad minimal restriction on the size of the output in one dimension.

These plotters were capable of producing quitesizable drawings.

=== Other printers ===A number of other sorts of printers are important for historical reasons, or for special purposeuses Digital minilab (photographic paper)Electrolytic printers Spark printerBarcode printer multiple technologies, including: thermal printing, inkjet printing, and laserprinting barcodes Billboard / sign paint spray printersLaser etching (product packaging) industrial printersMicrosphere (special paper) == Attributes == === Printer control languages === Most printers other than line printers acceptcontrol characters or unique character sequences to control various printer functions.

These may range from shifting from lower toupper case or from black to red ribbon on typewriter printers to switching fonts andchanging character sizes and colors on raster printers.

Early printer controls were not standardized,with each manufacturer's equipment having its own set.

The IBM Personal Printer Data Stream (PPDS)became a commonly used command set for dot-matrix printers.

Today, most printers accept one or more pagedescription languages (PDLs).

Laser printers with greater processing powerfrequently offer support for variants of Hewlett-Packard's Printer Command Language (PCL), PostScriptor XML Paper Specification.

Most inkjet devices support manufacturer proprietaryPDLs such as ESC/P.

The diversity in mobile platforms have led to various standardizationefforts around device PDLs such as the Printer Working Group (PWG's) PWG Raster.

=== Printing speed ===The speed of early printers was measured in unitsof characters per minute (cpm) for character printers, or lines per minute (lpm) for lineprinters.

Modern printers are measured in pages perminute (ppm).

These measures are used primarily as a marketingtool, and are not as well standardised as toner yields.

Usually pages per minute refers to sparsemonochrome office documents, rather than dense pictures which usually print much more slowly,especially colour images.

Speeds in ppm usually apply to A4 paper inEurope and letter paper, about 6% shorter, in the United States.

=== Printing mode ===The data received by a printer may be: A string of charactersA bitmapped image A vector imageA computer program written in a page description language, such as PCL or PostScriptSome printerscan process all four types of data, others not.

Character printers, such as daisy wheel printers,can handle only plain text data or rather simple point plots.

Pen plotters typically process vector images.

Inkjet based plotters can adequately reproduceall four.

Modern printing technology, such as laserprinters and inkjet printers, can adequately reproduce all four.

This is especially true of printers equippedwith support for PCL or PostScript, which includes the vast majority of printers producedtoday.

Today it is possible to print everything (even plain text) by sending ready bitmappedimages to the printer.

This allows better control over formatting,especially among machines from different vendors.

Many printer drivers do not use the text modeat all, even if the printer is capable of it.

=== Monochrome, colour and photo printers=== A monochrome printer can only produce an imageconsisting of one colour, usually black.

A monochrome printer may also be able to producevarious tones of that color, such as a grey-scale.

A colour printer can produce images of multiplecolours.

A photo printer is a colour printer that canproduce images that mimic the colour range (gamut) and resolution of prints made fromphotographic film.

Many can be used on a standalone basis withouta computer, using a memory card or USB connector.

=== Page yield ===The page yield is number of pages that can be printed from a toner cartridge or ink cartridge—beforethe cartridge needs to be refilled or replaced.

The actual number of pages yielded by a specificcartridge depends on a number of factors.

For a fair comparison, many laser printer manufacturersuse the ISO/IEC 19752 process to measure the toner cartridge yield.

=== Cost per page ===In order to fairly compare operating expenses of printers with a relatively small ink cartridgeto printers with a larger, more expensive toner cartridge that typically holds moretoner and so prints more pages before the cartridge needs to be replaced, many peopleprefer to estimate operating expenses in terms of cost per page (CPP).

=== Business model ===Often the "razor and blades" business model is applied.

That is, a company may sell a printer at cost,and make profits on the ink cartridge, paper, or some other replacement part.

This has caused legal disputes regarding theright of companies other than the printer manufacturer to sell compatible ink cartridges.

To protect their business model, several manufacturersinvest heavily in developing new cartridge technology and patenting it.

Other manufacturers, in reaction to the challengesfrom using this business model, choose to make more money on printers and less on theink, promoting the latter through their advertising campaigns.

Finally, this generates two clearly differentproposals: "cheap printer – expensive ink" or "expensive printer – cheap ink".

Ultimately, the consumer decision dependson their reference interest rate or their time preference.

From an economics viewpoint, there is a cleartrade-off between cost per copy and cost of the printer.

=== Printer steganography === Printer steganography is a type of steganography– "hiding data within data" – produced by color printers, including Brother, Canon,Dell, Epson, HP, IBM, Konica Minolta, Kyocera, Lanier, Lexmark, Ricoh, Toshiba and Xeroxbrand color laser printers, where tiny yellow dots are added to each page.

The dots are barely visible and contain encodedprinter serial numbers, as well as date and time stamps.

=== Wireless printers ===More than half of all printers sold at U.

S.

retail in 2010 were wireless-capable, butnearly three-quarters of consumers who have access to those printers weren't taking advantageof the increased access to print from multiple devices according to the new Wireless PrintingStudy.

== See also.

Select your printer from the drop-down menu at the shop location, and then click Properties.

Click the Paper/Quality tab, and then select the paper size of the output document from the drop-down menu.

Nearest Printing Shop

Click the Output tab, and then click the Staple drop-down menu and select Fold and Stitch.

Click OK.

Booklet Printing in Sacramento Explained

Under Page Sizing and Handling, click Booklet Printing.

Select Both sides from the Booklet subset drop-down menu.

Then, select Left from the Binding drop-down menu.

Click Print to print the document according to your booklet settings.

Open the document or photo you want to print.

Click File, then click Print.

Click the Printer drop-down menu, and select your printer from the list.

Click Properties, Preferences or Printer Properties.

Click the Finishing tab.

Printing on Both Sides for your Booklet Printing Services in Sacramento with RushMyPrints:

Select the Print On Both Sides check box.

From the Booklet Layout drop-down menu, click the Left binding or Right binding option.

The Pages per sheet option will automatically change to 2 pages per sheet.

Click OK.

Click Print to print the job.

The document prints.

Commercial Printer in Sacramento – What You Need to Know Before You Go in:

Printing Center

The Peoples Democratic Party (PDP) has reportedly stopped Atiku Abubakar, a former vice president, who just returned to its fold, from displaying posters during its forthcoming national convention.

Also barred, according to Daily Trust, are former governor of Jigawa state, Sule Lamido, his former Kano state counterpart, Ibrahim Shekarau, and Ayo Fayose of Ekiti state.

The report predicted that former Senate president, David Mark and Ahmed Makarfi could also have their posters flooding the event.

Governor Ifeanyi Okowa, who chairs the partys convention planning committee, disclosed the warning to the would-be aspirants after the committees meeting in Abuja.

He also said the movement of some important personalities would be restricted.

The report quoted Okowa as saying the chairmanship and other aspirants would not be allowed to campaign on the convention ground.

“We need to make this announcement to all our party members and well-wishers that the convention is going to be for delegates and we are expecting a little less than 3000 delegates.

“And those delegates have been properly accredited by the accreditation committee.

“And for those our party members that are going to come are welcome to Abuja, but they will not be allowed to come to the eagle square and this is because we want to be sure that we are in a position to deliver a credible elective convention.

“We are trying to put all these processes in place so that we dont over crowd the venue.

I want to urge aspirants to the various positions to please, keep their campaigners away from the convention venue and we believe all campaigns would have stopped by Friday.

“I will not expect any aspirant, especially presidential aspirants to bring their campaign posters, campaigners, men or women to the venue because it will not be allowed.

“And we want to appeal to all of them campaigning to desist from doing that.

For those who want to campaign for future election, possibly the presidential aspirants this convention is not the place to display campaign posters or to display their intentions.

“I believe there will be an appropriate convention for that.

I want to urge them to cooperate with us as a committee, the governor reportedly said.

Make more with the Glowforge 3D Laser Printer

Printing Machine

Hi friends, it's Maia Eden and welcome back to my channel! So I figured I would go ahead and give you guys a quick Maia Eden Shop update.

I have been working pretty hard on coming up with a couple of designs here and there for getting my brand I guess you could say started up and running and I just wanted to share with you guys what I have so far, What I have been working on and just sort of, yeah, what I have so far.

So, most of this is going to be on my computer over here I have come up with a couple of, like, pin designs an icon for my brand slash business, and also a rough draft or design or I don't really know what you'd call it But a design for business cards potentially, so I'm gonna go ahead and show you guys what I have.

Yeah! So first up is this peach Maia icon, This is what I made and I'm using paint tool Sai or SAI, however you say that.

but this is I think going to be my icon for my brand I have been super into Peaches for quite a while now and it's sort of a theme of mine So I figured that I would go ahead and incorporate that into my brand because I think that it is super super cute so I think I'm going to be having this little picture of me probably on my storefront page whatever I decide that is going to be but also on my Business card, which I'll go ahead and pull up here.

So this is going to be the first side of my business card and I have made this in a website called PicMonkey, now, I do know that I think you would have to pay for PicMonkey now.

It used to be a free online thing but I actually use PicMonkey to make all of my YouTube thumbnails So I did go ahead and invest in PicMonkey in their full.

Whatever you call it, their, I guess unlocking their full website.

Now I think though you do have to pay for it to use all of its features But this is what I've been using to kind of make up my design for my store here so I think this is going to be the font and This is gonna be the one side of my business card and then on the other side, I have it open another tab here, this is probably what I'm gonna be using So as you can see I have the peach Maia icon over there And then I'm also having my name as well as all of the links that I can be reached at.

This business card is mainly for my art so it isn't going to be like a YouTube business card at all I don't even know how that would necessarily work But these are probably going to be what I'm going to be sending out with any kind of products that I make I'll just go ahead and stick one of these cards in there and in regards to where I'm going to be printing these My dad actually works in printing so I'm just gonna go ahead and have him make me some of these and kind of see How that turns out so I can at least give that for free! So onto some actual designs that I've been working on I do have a couple of templates here and designs of Pins that I want to make so I actually want to at some point make a full BTS pin series, I think would be super fun and cute.

So this is a J-Hope You could probably tell by the heart-shaped mouth Maybe you can maybe you can't I don't know and these are the colors that I'm gonna want to be using here So I figured out how to go about even making these in the first place by watching a youtuber called Katnipp Illustrations.

She actually talks about how she goes about making her pins and how to even Kind of write up the names down here.

So what I gathered is that you do have to use Pantone colors, and so I found these colors from a Pantone website that I can show you guys at some point if you want to know kind of how I figured out how to pick these colors because you can't just use any colors over here because obviously It's gonna be printed out and printed colors that don't come out the same as digital color So you do have to make them in a specific way.

I also found out that screen print is a specific thing Sorry that my also my computer screen is like a really dirty (lol) I should probably have clean it up before I started recording.

Screen print is just where they print the color directly on and they don't just fill it with enamel I guess is what that is.

? So these colors all like the brown and the skintone here is all Filled in whereas just the pink doesn't have any kind of outline on it, so that has to be printed on I guess separately I don't really know how all of that works, that is just what I found out that that was.

So yeah, that is the J-Hope design and then I have Jimin here, so I think he is really cute Jimin is my bias of BTS And I'm absolutely in love with his a pink hair color and then I have Jin So Jin is just pretty standard.

I just gave him black hair because he often has a dark hair color.

This is Jungkook I tried to make him look a little bit more mischievous since he is a pretty I guess Mischievous and silly person so I kind of wanted to get that across with his expression.

This is RM, I went ahead and gave him his purple hair since I thought that that was a really cool look for him and I also tried to give him a very I guess calm and serene expression since He is a pretty calm and serene leader of the group.

This is Suga, I absolutely love his mint hair color and I figured that was a pretty popular one So that is what I gave him.

Last but not least I have V or Tae here and I gave him blonde hair Since I didn't give any of the other members a lighter hair color besides, like, the pastel pink color So I wanted to go ahead and give Tae a blondish color So yeah, those are some of the pin designs that I have so far So in regards to actually making enamel pins um that process has been pretty slow so far because I'm still trying to Find resources as to where to even manufacture enamel pins you do have to send off your designs to a manufacturer which is why I had the colors listed down below so that these designs can be read by a manufacturer and then made in Like at an actual printing enamel pin company place.

I don't know.

I guess a lot of these places are over in China, so you do have to be aware of that when you are communicating With these companies.

I have found a couple of resources Once again, I found one from Katnipp Illustrations, but I also wanted to go ahead and do my own research And kind of reach out to a number of different manufacturers, so I haven't picked out one just yet Partially because I don't think I can afford it just yet Making enamel pins is really expensive.

You have to be prepared to spend over $100 on Making these or at least the kind that I want to make.

There's all these different types of things that you have to be aware of because as opposed to just The enamel pins themselves, you have to decide if you want soft or hard enamel.

Hard enamel which is kind of what I'm looking to do is more expensive, Screen printing is more expensive, The more colors that you have makes it more expensive.

There is also a shipping fee, a PayPal processing fee.

So there's all these different extra things that you have to take into consideration when making pins.

So the prices that I'm looking at to just make one enamel pin - Oh, and by the way to I don't mean just like one enamel pin I mean like the minimum amount that you can order of one design is 100 pieces, so if I chose one of my BTS designs and sent it off to a manufacturer they would be making a minimum of 100 pins and the cost for that has ranged between, I've gotten prices from a little over $100 to $220 - $230, like somewhere in that range So you're spending like a hundred or a couple of hundred dollars depending on what you want So it is pretty good though that I have already reached out to kind of get this information now just so I can budget for it and figure out how I want to even start this up because yeah if I want to Make even just one design, it's gonna cost me.

A couple hundred dollars probably so yeah it's, it's.

A lot to think about and it's definitely going to be an investment and I have to kind of prepare myself to lose money before I make money if that makes sense? There's just so many different aspects to it, there's the products themselves, there's packaging, there's branding, there's marketing which is a whole other world on its own.

I have to figure out how I want to market myself so yeah, it is a little bit overwhelming but I am determined to Figure this out and to.

I don't know, get it going because if other people can do it why can't I? So.

That's kind of the mindset that I'm going with all of this but yeah, I just wanted to share with you guys what I have so far in regards to designs.

Um, so I hope that this was kind of helpful for you guys Or at least just kind of insightful as to my process Feel free to comment on any of these topics down below.

I will share I guess what I've learned so far with you guys Or if you have any advice to give me too that would be spectacular! Since like I said in the first video of this series, I have no idea what I'm doing! So yeah, any and all information regarding any of this process would be really helpful.

So, yeah, but thank you guys for watching I will see you next time! Bye-bye~! :).


Sales Sheets Printing Sacramento | RushMyPrints | (510) 640-0151

Being able to print multi-page documents as a booklet in Sacramento by adjusting the print settings in any windows application is crucial. Make sure that you save the configuration shortcut for future use.

Booklet Printing Services in Sacramento Explained

For starters, if you’re looking for printing services in Sacramento you’ll probably save time, money, and headaches if you hired or called a professional or commercial printer in Sacramento.

But, if you want to try and go for printing on your own, here’s what you should do:

First, open the print dialog box from the application where you are printing for most applications.

Click file and then print or press ctrl + P on your keyboard.

Select your printer from the drop-down menu or selection box and then click properties preferences or printer properties depending on the application.

Strike Thru Printing Effect | Strike Through Coating | Cedar Graphics Commercial Printing

Click the printing shortcuts tab select a printing shortcut from the list to use as a base. This is because the shortcut will not save correctly unless you have selected a previously created shortcut. If you’re having trouble with this process, make sure to contact your nearest Commercial Printer in Sacramento.

Paper Quality with Booklet Printing Services in Sacramento?

Next, you’re going to want to click the paper quality tab and then select the paper size of the original document. Then, click the finishing tab and finally, click the print on both sides check box.

From here, it’s smart to click the booklet layout drop-down menu and then select a binding option change your page orientation if desired.

Let’s head over and click the effects tab followed by a click on the ‘print document on option’ and then select your paper size from the drop-down menu.

AWHONN Convention 2017 Poster Presentation: A Program to Reduce Cesarean Delivery

Cheap Printing Services

Moving forward, click the output tab from the staple drop-down menu, select fold and stitch to fold and staple the booklet automatically return to the printing shortcuts tab. At RushMyPrints – your areas best Printing Services in Sacramento, we found that following these steps below really makes the process go smoothly for you.

Here we’re going to have you click save as type a shortcut name in the text field and then click OK.

One more time, you’ll have to click OK followed by selecting print in order to print fold and staple the Booklet Printing Services or documents according to your settings you desired!

Booklet Printing Services in Marketing For Sacramento

Booklet Printing Services throughout history, have been known to be very successful for marketing, educating and gaining awareness. Especially if you’re a startup company that needs a printing service right now.

Incorporate booklet printing into your marketing efforts for a sure way to get results.

Booklets Printing in Sacramento can help you to become an expert in your field.

Downtown Sacramento Printers

When putting together your booklet or Bulk Order Printing Services, don’t for get to incorporate images because visuals are the best way to catch a customer’s attention.

Booklets help demonstrate your products and services making purchasing easy.

Print booklets directly from the control panelof HP LaserJet Managed MFPs using the booklet finisher when copying from the ADF,or Automatic Document Feeder.

Place the documents to copy face-up in theautomatic document feeder and adjust the guides.

On the home screen of the printer controlpanel, touch Copy.

Touch Options,and then touch Booklet.

Touch Booklet Format.

Touch Fold and Stitch, and then touch either Automatic or Custom to set a booklet page limit.

Touch Paper Selection, and choose your paper output size.

Touch Done.

Change any other copy options, and then touch Copy.

The printer scans the original documents from the ADF and prints a booklet according to the selectedsettings.

let's talk about making stuff | pins, business cards, ??? | in the making

Also, studies show booklet printing is a successful and affordable way to reach an audience and gain their trust.

If you like to read more about booklet printing go to RushMyPrints.

And visit our Market Smarts Section.

RushMyPrints is your source for high quality quick turn booklet printing services and Bulk Order Printing.

From programs to posters or booklets the sky is the limit with RushMyPrints in Sacramento

Most importantly, we are 100% custom and able to fulfill even the most complex projects. We are able to take your order and deliver Rush Printing Services in a jiffy.

RushMyPrints offers both heat-set web and sheetfed printing which means your project will always be printed the most efficient way while providing excellent quality.

We specialize in printing for corporate publishing, and agency professionals who expect nothing less than impeccable quality and hassle free project management.

Get your instant quote now at RushMyPrints.

Why Should Startups use Rush Printing Services in Sacramento?

Free Business Card Templates

Meet Glowforge®, the 3D laser printer that lets you make magical thingsat the push of a button.

With a Glowforge 3D laser printer in your home, your next creation is never far away.

Your Glowforge lets you take your designsfrom idea to reality.

Print on dozens of beautifulmaterials like fabric, paper, leather, and wood.

Anything you imagine, you can bringto life.

Create meaningful gifts for friends, something personalized just for you, or unique products to sell.

Glowforge makes it easy for anyoneto see where their ideas take them.

Just use a pen to draw it directly ontoyour materials and watch your designs take shape.

Your Glowforge sees the design and does the rest.

From curiosity to creation, fromimagination to invention.

you never know what ideas you'll launch next.

When you don't want to design from scratch, you can browse and print from the Glowforge Design Catalog, then personalize the design to create something truly unforgettable.

With Glowforge, you'll find inspiration all around you so when a big idea strikes you'll be ready.

The Pro Passthrough unlocks your largestmost, ambitious plans.

Put it to work for you creating something impactful - even furniture.

DIY projects take on a whole new meaning.

Transform your home with stunning creations.

Spend time making more than justmemories.

Make more with Glowforge.

Drug dealers are targeting students with business cards selling - Daily News

Pad Printing

In this video we will talk about interesting facts about Experian.

Experian Was formerly a division of TRW an automotive electronics giant TRW was originally founded in 1901 as the cleveland cap screw company They started producing screws and bolts and grew to produce many parts for the aviation and automobile industry in the early 1960s TRW started a consumer credit information bureau collecting and selling consumer data and eventually became known as TRW information systems TRW information systems continued compiling data and were the first to start offering consumers direct credit report access in 1986 in 1991 rampant problems started appearing with TRW reported credit data Thousands of people in a town in Vermont had tax liens and accurately reporting against them similar cases started appearing in the entire northeast Forcing the deletion of countless tax liens against the states of Vermont Rhode Island, New Hampshire and Maine Dozens of lawsuits were filed against TRW claiming sloppy procedures to create credit files lack of response to consumer complaints and re reporting previously deleted incorrect data all Cases were settled out of court TRW then created a database known as the constituent relations information systems this systems sole purpose was to gather personal data on eight thousand politicians who held opinions on TRW in 1996 TRW was purchased from Bain Capital and the Thomas H.

Lee Partners for over 1 billion dollars by G us PLC a private group of investors it was then combined with CCN the largest credit reporting company in the United Kingdom G us retained the Experian main for their combined credit services subsidiary In 2010 Experian became the first credit reporting agency licensed credit bureau to go live in India Where it continues to supply reports to the Reserve Bank of India's RBI guidelines currently experiences to grow at a rapid pace in 2011 they acquired a majority stake in Compu tech sa a credit services provider in Colombia they also purchased medical present value verad interative an 8 digital Ltd a and Garlic Ltd expanding their data and marketing reach Experian has also become the second largest reporting agency in the business credit world They provide business credit evaluations for over 27 million small businesses and corporations worldwide These business records are spread over 80 countries That experience services experience reaches across four main geographic regions including North America Latin America UK in Ireland and EMEA Asia-pacific Experience headquarters are in Dublin, Ireland.

They have operational headquarters in Nottingham in the United Kingdom Costa Mesa, California and sau Paulo Brazil Experian PLC is listed on the London Stock Exchange and in a constituent of the FTSE 100 index in March 2011 Experian claimed revenue for the prior year of 4.

2 million currently Experian employs over 15,000 people working in 41 countries Experiences on providing quality data and analytics to businesses to help them better assess risk They possess of massive consumer and commercial Database that they manage to help businesses obtain the best and most up-to-date information They then extract significant extra value with this data by applying their own proprietary analytics and software Contact us today to build an excellent business credit profile and score with experience You.

Print Design

Saddle Stich Booklets in Sacramento | RushMyPrints